|
CWM 652
B&W Speakers
> Inwall
> CWM 652
Description
Slightly smaller than its two bigger cousins, the CWM652 still packs a very powerful punch thanks to top-range technologies. Its 130mm (5in) blue Kevlar® bass/midrange driver is housed in a die-cast chassis, providing extra rigidity for cleaner, faster bass. The speaker also incorporates a 25mm (1in) Nautilus™ tube-loaded aluminium dome tweeter, and a three-position high frequency switch for acoustic fine-tuning. Installation is almost effortless, thanks to our new QuickDogs™ fixing system and plug-and-play connection.
| Description | 2-way in-wall system | |
| Drive units | 1x o25mm (1in) Nautilus™ tube loaded aluminium dome tweeter | |
| 1x o130mm (5in) blue Kevlar® cone bass/midrange | ||
| Frequency range (-6dB) | 54Hz – 50kHz | |
| Maximum Amp Power | 25-100w | |
| Sensitivity SPL (2.83V, 1m) | 86 dB | |
| Impedance Nominal (min) | 8? (4.5?) | |
| Frame height | 264mm (10.9in) | |
| Frame width | 191mm (7.5in) | |
| Cut-out height | 228mm (9in) | |
| Cut-out width | 153mm (6in) | |
| Depth behind surface | 95mm (3.7in) | |
| Protrusion | 4mm (0.2in) | |
| Pre-mount Kit | PMK W5 | |
| Back Box | BB 6W |